Chemical peel treatments are a great way to erase the lines of time – as in those fine lines and wrinkles that you have been wanting to get rid of. There are a variety of different at home peels you could try for anti-aging. Some of the varieties of face peels are described below to help you decide which one is right for you. Light Chemical Peel – Light face peels are those in the alpha-hydroxy acids (AHA) and the beta-hydroxy acids (BHA) category. These include glycolic acid peels, salicylic acid peels, and lactic acid peels. These can be performed either by a skin care professional such as an aesthetician or dermatologist or with a chemical home peel kit. With a light chemical peel, there is no need to be given anesthesia. You will experience only a slight sting but no pain. These types of acid peels take just 10 to 15 minutes each. After an AHA or BHA chemical skin peel, you will see the skin begin to slough off and may notice a mild redness for a day or two at which point you can resume your daily routine. Six to twelve at home peels are needed to see significant results depending on your own skin condition. Moderate Chemical Peel – Medium chemical peel treatments commonly use an ingredient referred to as Tricholoroacetic Acid (TCA). Sometimes with a TCA peel, anesthesia is given but the peel itself is said to have a numbing effect. It gives off a very warm sensation which some individuals may find uncomfortable. A Jessner peel is also a commonly used medium chemical peel which is a combination of glycolic acid, salicylic acid, and resorcinol. Medium chemical peels do not need to be performed as much or as often as light chemical peels for great results. They are only recommended every three to six months for best results. TCA and Jessner peels are great for all skin tones, even olive and darker complexions which is a great benefit when dramatic results are desired more quickly. Deep Chemical Peel – These deeper face peels will deliver the most dramatic results given that they use the most powerful chemical peel solution available and are solely performed by a doctor or skin care professional. Deep peel solutions are not available over the counter and should not be attempted by the chemical home peel user. Chemical skin peels are truly one of the most effective methods to improve the appearance of wrinkles. Skin Rx recommends trying these glycolic acid peels, salicylic acid peels, and lactic acid peels for your anti-aging skin care treatments.

Both chemical peel treatments and microdermabrasion treatments are used to resurface and exfoliate the skin. The treatments work in different ways to achieve similar results. Microdermabrasion is recommended to improve superficial skin imperfections. This includes mild acne scars, age spots or sun spots, enlarged or visible pores, and fine lines. A chemical peel, whether it is lactic acid, glycolic acid, salicylic acid, or other variation, is recommended for more serious skin conditions such as deep or severe acne scarring and moderate wrinkles or extensive sun damage. This means that the recovery time from a chemical peel may be longer as well. Microdermabrasion treatments come in just one strength, whereas a chemical skin peel is available in various strengths ranging from mild to medium to deep. A deep chemical peel is usually only administered by a skin care professional who may use anesthetic due to pain or discomfort involved. Microdermabrasion treatments do not hurt at all, even with several treatments. As far as recovery time involved for a chemical peel, it will depend on what acid was used and at what strength. If you are looking for something mild, a glycolic acid peel is recommended. While they require more than one treatment due to their mildness, glycolic acid peels do produce great results over time. Other face peels, such as a Jessner peel, may produce redness which lasts a bit longer and you may experience a burning sensation as they are a bit stronger due to the ingredients used. Microdermabrasion on the other hand, requires no downtime at all and the recovery takes just a few hours. When it comes to results, microdermabrasion will require several treatments to be optimally effective, sometimes up to ten or twelve treatments scheduled two weeks apart. A maintenance session of microdermabrasion treatments is then recommended every couple of months. In contrast, a deep chemical peel needs only one treatment. A medium chemical peel will require a treatment once every 6 weeks and then a maintenance treatment once every 2-3 months for a minimum of one year. Microdermabrasion and a chemical skin peel can be used on the face, chest, neck, back, and hands. Both treatments take about the same amount of time whether performed at home or in a professional skin care facility. Microdermabrasion and chemical peel treatments are both offered professionally in dermatologist’s offices and other skin care facilities but can also be performed with home versions.

At home peels, which are usually milder than deep professional chemical peel treatments typically cost between $15-$100 per treatment and home microdermabrasion kits cost anywhere from $40-$65 which include multiple treatments.

Jessner’s Peel is a combination chemical skin peel treatment which has been proven effective in peeling away the superficial layers of the skin. It is a light chemical peel which is a combination of resorcinol, salicylic acid, and lactic acid. This combination provides more significant results than these ingredients used alone to achieve better exfoliation and deeper penetration. A Jessner peel can also be used for hyperpigmentation to lighten areas of the skin and even to treat brown spots due to aging or sun damage. Jessner’s peel works well on all skin types to smooth and rejuvenate the skin and improve mild to severe acne, uneven skin tone, hyperpigmentation, and moderate wrinkles. Jessner’s chemical peel can be used on the face, neck, upper chest, and hands, as well. A Jessner's Peel is a medium depth peel, stronger than other chemical face peels on the market, which can either be done by a dermatologist or skin care professional or as an at home chemical peel. Because of the unique combination of ingredients, a Jessner’s peel can improve more extensive skin damage from acne, aging, and sun damage compared to lactic acid or glycolic acid peels. When you are ready to perform your Jessner peel, you will first need to cleanse your face with a glycolic cleanser such as

Skin Rx’s Glyco-Lactic Gel Cleanser. This will ensure that no dirt or oil is left behind on your skin so the Jessner peel will be able to properly penetrate your skin.  Once you have applied the Jessner’s chemical peel, it is normal to feel a mild burning sensation on your skin. It may help to have a fan close by which you can use to blow cool air onto your face to alleviate the burning feeling. A Jessner’s peel stays on for a short period of time as recommended on the product instructions and then it is to be rinsed off thoroughly with cool water. Over the next few days, your skin will peel or flake off to reveal healthier and smoother skin.